69
SMS (text messages)
S1_SL1 / englisch / A31008-M373-B103-1-7619 / sms.fm / 08.06.2004
Installing a new ringer tone or a logo
Precondition: You have opened the incoming message list (page 64).
If you don't like the melody/logo, press
No after Install. The installation is cancelled.
Activating/deactivating a logo
s
Scroll to the desired text message as necessary.
Read textmessage
Confirm. You can see in the title or icons that data for
installing the melodies/logos you have chosen has
been sent. You will hear the new melody or see a pre-
view of the logo.
If you like the melody/logo:
[RRRRRRRRRRRRRRRRRRRRRRRRRR ]
Install
Press the display key to initiate the installation.
[RRRRRRRRRRRRRRRRRRRRRRRRRR ]
Yes
Press the display key to install the new melody or
logo.
r
For a new melody: chose the number of the old
ringer melody you want to replace with the new mel-
ody. You will hear the old ringer melody to be sure it
is the one you want.
Confirm.
OK
OK
i
◆ After installation, the melodies and logos will remain in the SMS
incoming message list until you delete the SMS (page 65).
◆ Other handsets registered to the same base can also have the melody
or logo installed.
◆ For more information about opening a logo or melody contained as
an attachment in an SMS, see page 68.
v
Open the menu.
sì
Select the menu item and confirm.
s Screen Picture
Select and confirm, in order to activate or deactivate
the logo (‰ = on).
a
Long press (back to idle status).
OK
OK
i
The logo is not displayed:
◆ during a call,
◆ if the room monitor or Walk and Talk mode is activated,
◆ if you just received an SMS or a message on the answering machine
(on the Gigaset with integrated answering machine),
◆ or when the handset has been deregistered.
To Next Page
Loading...
