77
Operating more than one handset
S1_SL1 / englisch / A31008-M373-B103-1-7619 / several_handsets.fm / 08.06.2004
Activating the room monitor function and entering the "call to" number for
the first time
Once the room monitor is activated, switch directly to the room monitor setting with v
(open menu).
Step 1: Open input field for room monitor:
v
Open the menu.
sé
Select the menu item and confirm.
Room Monitor
Confirm. The input field is opened.
Step 2: Activate room monitor:
r
Go to the line Room M.: On.
Step 3: Enter the destination number:
R[RRRRRRRRRRRRRRRRRRRR]
s Edit
Jump to the line Call to: and press the display key.
The input field for the phone number is opened.
either ...
Enter an internal number as the destination
number:
[RRRRRRRRRRRRRRRRRRRRRRRRRR ]
INT
Press the display key.
R[RRRRRRRRRRRRRRRRRRRR]
~ Save
Enter the internal phone number and press the dis-
play key. If the room monitor should call all regis-
tered handsets, then enter P instead of an internal
phone number (group call).
or ...
Enter an external number as the destination
number:
~ Enter the telephone number.
Press the display key.
Save Entry
Confirm. The entry is stored.
... then
Step 4: Set the sensitivity:
sr
If required, jump to the line Level: and set the sensi-
tivity for the noise level (Low or High).
[RRRRRRRRRRRRRRRRRRRRRRRRRR ]
Save
Press the display key. The room monitor function is
now activated.
OK
OK
à
OK
i
◆ If you want to copy the external phone number from the directory,
press the bottom of the control key s in the input field for the phone
number (open directory). Select an entry with
s
and confirm
with .
◆ If you enter an external number as the destination number, only the
last 4 digits will appear in the input field.
OK
To Next Page
Loading...
