Step by Step
Conducting calls – the basic functions
8
Answering or rejecting a call
Answering a call
Your handset rings (Æ Page 33). The caller information
appears on the display. The name and/or telephone
number of the caller can be displayed. The following op-
tions are available for answering a call:
k The handset is in the charging shell: remove the hand-
set from the charging shell (only works if "Auto Answer"
is active Æ Page 33).
or The handset is not in the charging shell. Press the Talk
key or Speakerphone key.
When you have answered the call you can
• transfer the call (Æ Page 80),
• place the call on hold and consult with someone
else in the room (Æ Page 82),
• place the call on hold and call a second partner
(Æ Page 7) in order to forward (Æ Page 80) or tog-
gle the call (Æ Page 82) or to set up a conference
(Æ Page 83).
Rejecting a call
If you do not wish to be disturbed, you can reject the
call.
Confirm the message displayed with one of the two dis-
play keys. The call is rejected and the caller hears the
busy tone.
Reject call
To Next Page
Loading...
