Siemens HiPath 3000 - Activating or Deactivating the Keypad Lock; After Leaving the Radio Network

Conducting calls – the basic functions
11
Step by Step
Activating or deactivating the keypad
lock
This feature protects against accidentally pressing but-
tons when the handset is in a pocket, forexample. The
keypad lock turns off automatically when a call comes
in and turns back on when the call has ended.
# Press the hash key until the activation or deactivation is
confirmed by a crescendo tone sequence.
A key icon on the display indicates that keypad lock is
active.
After leaving the radio network
The base name flashes on the display. The handset re-
peatedly attempts to synchronize with a base. The inter-
vals between synchronisation attempts increase on ac-
count of the integrated power saving function.
You can switch off your handset to save the battery
pack.
Note:
You can dial a pre-programmed emergency
number when the keypad is locked.