Siemens HiPath 3000 Operating Manual

Step by Step
Conducting calls – the basic functions
10
> < [Select the menu item and confirm.
or:
> < [Select the menu item and confirm.
then:
o Enter the destination phone number.
Save the settings.
Press the On-hook key to end the operation.
Deactivating call forwarding
Prerequisite:
The room monitor function is activated.
or Press and hold down the Talk key or press the Speaker-
phone key.
Call the system menu.
> < [Select the menu item and confirm.
Press the On-hook key briefly to end the operation.
2=external calls
only?
3=internal calls only?
Save
Note:
The external code must be entered before ex-
ternal phone numbers. If the service engineer
has activated DTMF DID, you can also forward
calls to these external phone numbers.
Menu
Divert cancelled?

Siemens HiPath 3000 Specifications

General

Brand	Siemens
Model	HiPath 3000
Category	Telephone
Language	English