Conducting calls – enhanced functions
67
Step by Step
Call charge display
After a call has ended, the display shows the connec-
tion charges for the current call as standard. If the costs
are to be displayed continuously during an outgoing call,
this function must be requested from the carrier.
You can check and display the call charges for your
phone number as a total for a period that can be set by
the service engineer.
First the call charges for the last charged call are dis-
played. The total call charges are displayed after five
seconds.
This function can also be called by entering the code
(Æ Page 123).
or Press and hold down the Talk key or press the Speaker-
phone key.
Call the system menu.
> < [Select the menu item and confirm.
> < [Select the menu item and confirm.
Press the On-hook key to end the operation.
Note:
If a call is transferred, the costs are assigned to
the telephone to which the call was transferred
from this point onwards.
Menu
Service?
*
65=Show call char-
ges?
To Next Page
Loading...
