Siemens HiPath 3000 Operating Manual

Putting the handset into service
16
Putting the handset into service
Removing the protective cover
Ex protection and IP rating compliance
(Ex protection only applies to Gigaset M2 Ex professional)
Inserting the battery compartment seal
Insert the battery compartment seal carefully (around the battery compart-
ment).
Inserting the plug into the charging socket
Insert the plug into the Slim Lumberg jack on the underside of the handset.
Only remove the plug when charging the handset, connecting a wired
headset or connecting a data transfer cable.
Removing this plug cancels the Ex protection and IP rating.The hand-
set should only be operated in this condition in permitted zones.
Remove the protective cover from the display before
putting the handset into service.

Siemens HiPath 3000 Specifications

General

Brand	Siemens
Model	HiPath 3000
Category	Telephone
Language	English