Conducting calls – enhanced functions
43
Step by Step
Setting the speakerphone volume
The volume can be set during a call (Æ Page 25).
Conducting calls with the headset
The handset can be used with a corded and cordless
headset.
Corded headset
You can connect a corded headset via the jack on the
underside of the handset. The headset must have a
Slim Lumberg connector.
The receiver inset and microphone functions are activat-
ed on the headset once it is connected.
Cordless headset
You can use a cordless, Bluetooth headset with your
handset. This means your hands are free while making
calls, and there are no annoying cables, forexample,
when you are working at your computer or when you
are on the road.
Note:
If you wish to replace the handset in the charg-
ing shell during a call, forexample, because the
battery pack is flat, hold down the Speaker-
phone key to prevent the call from being cleared
down.
Danger:
The use of wired headsets is prohibited in poten-
tially explosive atmospheres.
Danger:
Only BT headsets with the appropriate Ex protec-
tion rating are permitted in potentially explosive
atmospheres.
To Next Page
Loading...
Need help?
General