Siemens HiPath C10 User Manual

hwc_vnsintro.fm
A31003-W1040-U101-1-7619, July 2006 DRAFT
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
121
Virtual Network Services
Setting up a new VNS
6.9 Setting up a new VNS
Now that you are familiar with the VNS concepts, you can now set up a new VNS. Setting up a
new VNS involves the following general steps:
● Step one – Create a VNS name
● Step two – Define the topology parameters
● Step three – Configure the VNS
For information on setting up a new VNS, see Chapter 7, “Virtual Network configuration”.

Siemens HiPath C10 Specifications

General

Brand	Siemens
Model	HiPath C10
Category	Controller
Language	English