Siemens HiPath C10 User Manual

hwc_mitigator.fm
A31003-W1040-U101-1-7619, July 2006 DRAFT
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
225
Working with the Mitigator
Working with friendly APs
4. To clear all rogue access points from the Mitigator scan results, click Clear Detected
Rogues. All APs are removed from the list.
10.6 Working with friendly APs
To view the friendly APs:
1. From the main menu, click Mitigator. The Mitigator screen appears.
2. Click the Friendly APs tab.
To add friendly APs manually:
1. From the main menu, click Mitigator. The Mitigator screen appears.
2. Click the Friendly APs tab.
3. To add friendly access points manually to the Friendly AP Definitions list, type the
following:
● MAC Address – Specifies the MAC address for the friendly AP
● SSID – Specifies the SSID for the friendly AP

Siemens HiPath C10 Specifications

General

Brand	Siemens
Model	HiPath C10
Category	Controller
Language	English