hwc_ongoing.fm
A31003-W1040-U101-1-7619, July 2006 DRAFT
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
259
Performing system maintenance
Performing HiPath Wireless Controller software maintenance
● User ID – The user ID that the controller should use when it attempts to log in to the
FTP server.
● Password – The corresponding password for the user ID.
● Confirm – The corresponding password for the user ID to confirm it was typed
correctly.
● Directory – The directory on the server in which the image file that is to be retrieved
is stored.
● Filename – The name of the image file to retrieve.
● Platform – The AP hardware type to which the image applies. The are several types
of AP and they require different images.
5. Click Download. The image is downloaded and added to the list.
To delete a backup available for restore:
1. From the main menu, click Wireless Controller Configuration. The Wireless Controller
Configuration screen appears.
2. From the left pane, click Software Maintenance. The System Maintenance screen
appears.
3. Click the Restore tab.
4. To delete a backup from the list, in the Available Backups list, click the backup.
5. Click Delete. The backup is removed from the list.
12.4.5 Upgrading a HiPath Wireless Controller using SFTP
You can upload an image file to the HiPath Wireless Controller using Secure FTP (SFTP). The
HiPath Wireless Controller supports any SFTP client.
>
You must enable management traffic before you try to connect with a SFTP client.
Specify the exact image path for the corresponding SW package (see directory
information below). Otherwise, the HiPath Wireless Controller cannot locate them for
SW upgrades/updates.
To Next Page
Loading...
