Virtual Network configuration
A31003-W1040-U101-1-7619, July 2006 DRAFT
160 HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
hwc_vnsconfiguration.fm
Configuring filtering rules for a VNS
If the filter ID attribute value (or Login-LAT-Group attribute value) from the RADIUS server
matches a filter ID value that you have set up on the HiPath Wireless Controller, the HiPath
Wireless Controller applies the filtering rules that you defined for that filter ID value to the
wireless device user.
If no filter ID is returned by the authentication server, or no match is found on the HiPath
Wireless Controller, the filtering rules in the default filter will apply to the wireless device user.
To define filtering rules for a filter ID group:
1. From the main menu, click Virtual Network Configuration. The Virtual Network
Configuration screen appears.
2. In the left pane Virtual Networks list, click the VNS you want to define filtering rules for a
filter ID group. The Topology tab is displayed.
3. Click the Filtering tab.
4. From the Filter ID drop-down list, select one of the names you defined in the Filter ID
Values field on the RAD Policy tab. For example, select one of your organization’s user
groups, such as Sales, Engineering, Teacher, Guest, etc.
To Next Page
Loading...
Need help?
General
