Availability, mobility, and controller functionality
A31003-W1040-U101-1-7619, July 2006 DRAFT
190 HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
hwc_controlleravailmobility.fm
Availability overview
>
The availability feature provides APs with a list of interfaces to which the AP should
attempt to automatically connect to when a connection with an active controller link
is lost. The provided list identifies the local active interfaces (enabled on the primary
and backup controllers) for the active controller as well as the active interfaces for
the backup controller. The list is sorted by top-down priority. If the active link is lost
(poll failure), the AP automatically scans (pings) all addresses in its availability
interface list. The AP will then connect to the highest priority interface that responds
to its probe.
To Next Page
Loading...
