Working with third-party APs
A31003-W1040-U101-1-7619, July 2006 DRAFT
214 HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
hwc_3rdpartyaps.fm
3. Highlight the appropriate port, and in the Function box, select 3rd-party AP from the
drop-down list. Make sure that Management Traffic and SLP are disabled for this port.
4. Connect the third-party access point to this port, via a switch.
Step 2 – Define a VNS for the third-party AP port
1. From the main menu, click Virtual Network Configuration. The Virtual Network
Configuration screen appears.
2. In the left pane, type a name that will identify the new VNS in the Add subnet box, and then
click Add subnet. The name appears in the Virtual Networks list. The Topology screen
appears.
To Next Page
Loading...
