hwc_mitigator.fm
A31003-W1040-U101-1-7619, July 2006 DRAFT
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
223
Working with the Mitigator
Working with Mitigator scan results
To view Mitigator scan results:
1. From the main menu, click Mitigator. The Mitigator screen appears.
2. Click the Rogue Detection tab.
3. To modify the screen’s refresh rate, type a time (in seconds) in the Refresh every __
seconds box.
4. Click Apply. The new refresh rate is applied.
5. To view the Rogue Summary report, click Rogue Summary. The Rogue Summary report
appears in a popup window.
6. To clear all detected rogue devices from the list, click Clear Detected Rogues.
To Next Page
Loading...
