Performing system maintenance
A31003-W1040-U101-1-7619, July 2006 DRAFT
244 HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
hwc_ongoing.fm
Performing wireless AP client management
To blacklist a wireless device client using its MAC address:
1. From the main menu, click Wireless AP Configuration. The Wireless AP Configuration
screen appears.
2. From the left pane, click Client Management. The Disassociate tab appears.
3. Click the Blacklist tab.
4. To add a new MAC address to the blacklist, in the MAC Address box enter the client’s MAC
address.
5. Click Add. The client appears in the MAC Addresses list.
6. To save your changes, click Save.
>
You can use the Select All or Clear All buttons to help you select multiple
clients.
To Next Page
Loading...
