hwc_ongoing.fm
A31003-W1040-U101-1-7619, July 2006 DRAFT
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
261
Performing system maintenance
Performing HiPath Wireless Controller software maintenance
Manager. To configure the HiPath Wireless Controller to interact with the HiPath Wireless
Manager, a shared secret must be defined for both. For more information, see the HiPath
Wireless Manager User Guide.
To configure a shared secret for interaction with the HiPath Wireless Manager
1. From the main menu, click Wireless Controller Configuration. The Wireless Controller
Configuration screen appears.
2. From the left pane, click Secure Connections. The Shared Secret for Remote
Connections screen appears.
3. In the first box, type the controller’s IP address.
4. In the second box, type the shared secret to be used by both the HiPath Wireless Controller
and the HiPath Wireless Manager. The shared secret can be a maximum of 16 (232 ASCII)
characters. Each IP connection can have a different secret.
5. Click Add/Update. The table is updated with the IP address and shared secret.
6. To hide the shared secrets, click Hide Shared Secrets. To show the shared secrets, click
Show Shared Secrets.
To Next Page
Loading...
