hwc_apstartup.fm
A31003-W1040-U101-1-7619, July 2006 DRAFT
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
79
Configuring the wireless AP
Configuring the wireless APs for the first time
3. In the Security Mode section, select one of the following:
● Allow all Wireless APs to connect
● Allow only approved Wireless APs to connect
The Allow all Wireless APs to connect option is selected by default. For more
information, see Section 5.3.1, “Security mode”, on page 77.
To Next Page
Loading...
