Siemens LDS 6 - 3.5 Flange Installation Requirements; 3.6 Installation of Flanges

+
–
_
+




IURPVHQVRU
FRQQHFWLRQ
FDEOH
IURPVXUJH
SURWHFWLRQ
'HWHFWRUFDUG
60$ILEHUFRQQHFWRU
JUHHQ
EODFN
UHG
EURZQ
Handling of entry seal gaskets used with optics housing CD 6.
The sensor connection and hybrid cables connected to the optics housing CD 6 are 󹪝tted with
entry seal gaskets. To make sure the optics housings are sealed appropriately, the gaskets
must be correctly installed. When the gaskets are delivered together with the cables they are
󹪝tted in the protection tubes.
When mounting the gaskets in the optics housing, please proceed as follows:
Electric connections
4.2Connecting the LDS 6, optics housing CD 6
LDS 6 & Optics housing CD 6 Compact Operating Instructions
Compact Operating Instructions, 12/2022, A5E03314905-AB 37