EasyManua.ls Logo

Siemens LME39.100C2 - Standards and certificates

Siemens LME39.100C2
73 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12/73
Building Technologies Division Basic Documentation LME39… CC1P7106en
1 Safety notes 03.02.2016
1.8 Standards and certificates
Applied directives:
Low-voltage directive 2014/35/EC
Directive for gas-fired appliances 2009/142/EC
Electromagnetic compatibility EMC (immunity) *) 2014/30/EC
Directive for pressure devices Valid until 2018-04-21:
2009/142/EG
Gas Appliances Regulation (EU) Valid from 2018-04-21:
(EU) 2016/426
*) The compliance with EMC emission requirements must be checked after the burner control is
installed in equipment
Compliance with the regulations of the applied directives is verified by the adherence to
the following standards / regulations:
Automatic burner control systems for burners and
appliances burning gaseous or liquid fuels
DIN EN 298
Safety and control devices for gas burners and gas burning
appliances
DIN EN 13611
Automatic electrical controls for household and similar use
Part 2-5:
Particular requirements for automatic electrical burner
control systems
DIN EN 60730-2-5
The relevant valid edition of the standards can be found in the declaration of
conformity!
Note on DIN EN 60335-2-102
Household and similar electrical appliances - Safety - Part 2-102:
Particular requirements for gas, oil and solid-fuel burning appliances having electrical
connections. The electrical connections of the LME39 and the AGK11 comply with
the requirements of EN 60335-2-102.
EAC Conformity mark (Eurasian Conformity mark)
ISO 9001:2015
ISO 14001:2015
OHSAS 18001:2007
China RoHS
Hazardous substances table:
http://www.siemens.com/download?A6V10883536

Table of Contents

Related product manuals