Siemens LME39.100C2 - Total number of startups; End of info level

50/73
Building Technologies Division Basic Documentation LME39… CC1P7106en
17 Info level 08.12.2017
17.2.5 Total number of startups
P
V
h
min
s%
Bild 36/0707
On the left, parameter 166: is displayed flashing.
On the right, characters ._._ appear.
Example: Parameter 166: ._._
/
reset
1…3 s
P
Vh
mi n
s%
Bild 37/0707
Pressing the
/
reset
button (1…3 seconds) and
releasing it when ._._ flashes displays the total
number of startups.
Example: 000056
/
reset
or
ESC
P
V
h
min
s%
Bild 36/0707
Press
/
reset
or
ESC
to go back to the display
of parameters.
To the next parameter
Back to the previous
parameter
17.2.6 End of info level
P
Vh
mi n
s%
Bild 38/0707
When this display appears, you have reached the
end of the info level.
The display shows – End – flashing.
To the first parameter on the
info level
To the final parameter on the
info level
ESC
or
/
reset
>8 s
P
Vh
mi n
s%
Bild 22/0707
Press
ESC
or the
/
reset
button (>8 seconds)
to return to operating mode
The display shows OPErAtE.
P
Vh
mi n
s%
Bild 9/0707
When this display appears, you are back to
standby and you can change to the next level
mode.
/
reset
Press
/
reset
to switch between
the service and the
parameter level.