Siemens LME39.100C2 - Identification date; Identification number

47/73
Building Technologies Division Basic Documentation LME39… CC1P7106en
17 Info level 08.12.2017
17.2 Display of info values
17.2.1 Identification date
The identification date described below corresponds to the creation date for the
program sequence and cannot be changed by the user.
P
V
h
min
s%
Bild 29/0707
On the left, parameter 102: is displayed flashing.
On the right, ._._ is displayed.
Example: 102: ._._
/
reset
1…3 s
P
Vh
mi n
s%
Bild 30/0707
Pressing the
/
reset
button (1…3 seconds) and
releasing it when ._._ flashes displays the
identification date (creation date of the program
sequence), DD.MM.YY.
Example: Identification date 03.11.05
/
reset
or
ESC
P
V
h
min
s%
Bild 29/0707
Press
/
reset
or
ESC
to return to the display of
parameters.
To the next parameter
17.2.2 Identification number
P
V
h
min
s%
Bild 31/0707
On the left, parameter 103: is displayed flashing.
On the right, identification number 0 appears.
Example: 103: 0
To the next parameter
or
/
reset
for <1 s
Back to the previous
parameter