Siemens LME39.100C2 - Display of service values; Error history; Mains voltage; Intensity of flame

52/73
Building Technologies Division Basic Documentation LME39… CC1P7106en
18 Service level 08.12.2017
18.2 Display of service values
18.2.1 Error history
Refer to section Parameter with index, with or without direct display/Example of
parameter 701: Error history.

Note!
Can be deleted for service (refer to chapter Parameter list)!
Refer to chapter Error code list!
18.2.2 Mains voltage
P
V
hmins %
Bild 184/1107
Parameter 951: appears flashing.
Mains voltage is displayed on the right.
Example: 951: 224
To the next parameter
Back to the previous
parameter
18.2.3 Intensity of flame
P
Vhmins%
Bild 41/0707
The display shows parameter 954: flashing.
On the right, the intensity of the flame is displayed
as a microamperes (µA).
Example: 954: 0.0
End of service level – End –
Back to the previous
parameter
18.2.4 End of service level
P
Vh
mi n
s%
Bild 38/0707
When this display appears, you have reached the
end of the service level.
The display shows – End – flashing.
To the start of the service
level
To the end of the service
level
ESC
P
Vh
mi n
s%
Bild 22/0707
Press
ESC
to return to operating mode.
The display shows OPErAtE.
P
Vh
mi n
s%
Bild 9/0707
When this display appears, you are back to
standby and you can change to the next level
mode.