Siemens LME39.100C2 - LME39.400...

68/73
Building Technologies Division Basic Documentation LME39… CC1P7106en
22 Parameter list 08.12.2017
22.2 LME39.400...
Parameter
number
Parameter Edit Value range Increment Default setting Password level
reading from
level
Password level
writing from level
Min. Max.
000 Internal parameters
41 Heating engineer’s password (4 characters) Edit xxxx xxxx --- --- --- OEM
42 OEM’s password (5 characters) Edit xxxxx xxxxx --- --- --- OEM
100 General
102 Identification date Read only --- --- --- --- Info ---
103 Identification number Read only 0 9999 1 0 Info ---
113
Burner identification AZL2:
Readable
ACS410:
Selectable
0 99999999 1 burnEr Id Info OEM via ACS410
164 Number of startups Resettable 0 999999 1 0 Info Info
166 Total number of startups Read only 0 999999 1 0 Info ---
200 Burner control
226 Preignition time Edit 1.176 s 37.485 s 0.147 s 1.911 s SO OEM
228 Flame detection time Edit 0 s 1.47 s 0.147 s 0.294 s SO OEM
230 Interval: Ignition OFF until fuel valve 2 (BV2) release Edit 1.176 s 74.97 s 0.294 s 9.996 s SO OEM
231 2nd safety time Edit 0 s 7.35 s 0.147 s 4.557 s SO OEM
234 Postpurge time Edit 0 s 1237.005 s 4.851 s 0 s SO OEM
240
Repetition limit value loss of flame and no flame at the end of safety
time
0 = none
1 = none
2 = 1 x repetition
3 = 2 x repetition
4 = 3 x repetition
Edit 0 4 1 1 SO OEM
256 Purge time Edit 0 s 74.97 s 0.294 s 15.582 s SO OEM
257 Postignition time Edit 0 s 37.485 s 0.147 s 4.116 s SO OEM