Name Value
Internal contact +
External contact -
The measurement sequence is triggered by the rising edge of the
external signal.
The external trigger signal can be supplied via the connections in the
magnet cover.
Performing
1 Connect the source of the external trigger signal to the cinch jack
trigger input (magnet cover, left).
2 Perform external triggering. See: Software operator manual
4.6.2
Physiological imaging 4
MAGNETOM Avanto, MAGNETOM Verio | syngo MR E11
103
Print No. MR-01501G.621.02.02.02
To Next Page
Loading...
