◾ Left mouse button:
– Selecting or moving objects
– Starting applications
– Executing commands
◾ Center mouse button/wheel:
– Changing the window values of patient images
– Scrolling (for example, through the Patient list)
◾ Right mouse button:
– Opening the context menu (depending on the position of the
mouse pointer)
syngo MR Workplace (optional)
The syngo MR Workplace allows for evaluation, documentation and
post-processing of previously measured images while acquiring
images at the syngo Acquisition Workplace. It accesses the database
of the host processor.
It is not possible to perform measurements at the syngo MR
Workplace. It is not connected to the MR scanner or the image
reconstruction system.
System control
You can use the system control to operate the system and the patient
table. It comprises control units and the table display.
Example: System control on the MAGNETOM Avanto
3.2.6
3.3
MR system components 3
MAGNETOM Avanto, MAGNETOM Verio | syngo MR E11
55
Print No. MR-01501G.621.02.02.02
To Next Page
Loading...
