Starting the system (System On)
System start-up includes the following steps:
◾ Switching on the MR system at the alarm box
◾ Switching on the syngo MR Workplace
◾ Checking the MR system components
Do not perform preliminary examination steps (for example,
moving the patient table, connecting coils) at the MR system
while starting up the system.
After “system off” or Standby, wait at least 30 seconds before you
switch on the system again.
MAGNETOM Verio: Prior to starting the system, the patient table
should be in the Home Position.
✓
The daily functionality checks have been completed.
( Page 105 Daily functionality checks)
✓
The coils used are fully connected to the coil sockets.
✓
Coils comprising several parts (for example, head coils) are closed.
SYSTEM ON at the different versions of the alarm box
1 Turn the keyswitch to the right.
2 Press the SYSTEM ON button.
5.2.1
Switching on the MR system at
the alarm box
MR system operation 5
MAGNETOM Avanto, MAGNETOM Verio | syngo MR E11
107
Print No. MR-01501G.621.02.02.02
To Next Page
Loading...
