The slice for measurement is marked. The display shows the
relative tabletop position of the marked slice.
3 If the laser is correctly positioned, press the Center Position button
to move the table into the magnet isocenter.
The tabletop moves to the selected position and the laser shuts off
automatically.
When the table is not moving, the laser-light localizer shuts off
automatically after 60 seconds.
Alarm box
Description
The alarm box has the following functions:
◾ Displays alarm signals
◾ Switches the MR system on and off
◾ Magnet Stop / Magnet Quench
Depending on your system configuration one of the following alarm
box versions is installed near the syngo Acquisition Workplace.
Alarm box versions 1-3
3.6
3.6.1
3 MR system components
66
MR System | Operator Manual
Print No. MR-01501G.621.02.02.02
To Next Page
Loading...
