WARNING
Fire or electrical accidents!
Personal injury
◆ Press the System Off switch at the alarm box immediately.
◆ Contact your fire department.
A button to stop table movement is located on the intercom and on
the control unit (red button). As soon as the button is activated, table
movement and the current measurement are stopped immediately.
Stop symbol and variants of the Table Stop button on the control units of the different systems
Stop symbol:
Table Stop button
Safety 2
MAGNETOM Avanto, MAGNETOM Verio | syngo MR E11
45
Print No. MR-01501G.621.02.02.02
To Next Page
Loading...
