Siemens-Elema AB SPS-UD RX B7-120.033.01.10.02 MAMMOMAT 300
Solna, Sweden 05.98 65 02 186
Preparatory work 3-1
General
Scope of delivery
The MAMMOMAT 300 is packed in one crate and one cardboard box:
Crate (length 2140 mm, width 800 mm, height 1375 mm)
The crate contains:
• Compression plate.
• Object table (Bucky).
• Diaphragm
• Stand with X-ray tube assembly and base plate.
• Cover panels
• Installation material
• Miscellaneous small parts
• Stanchions for the lead-glass pane (radiation shield).
• Cable ducts
• Technical documents
Cardboard box (lenght 1210 mm, width 820 mm, height 700 mm)
The cardboard box contains:
• Generator with integrated control panel, high-voltage generator and base plate.
• Lead-glass pane
Unpacking
As a general rule, the directional marks on the crates should be observed during transport,
storage and unpacking.
The stand crate is bolted together, while the cardboard box is secured with plastic straps.
CAUTION!
Wear safety footwear.
}
packed together in a separate box
To Next Page
Loading...
