Siemens MAMMOMAT 300 - Unpacking the stand

Siemens-Elema AB SPS-UD RX B7-120.033.01.10.02 MAMMOMAT 300
Solna, Sweden 05.98 65 02 186
3-2 Preparatory work
Unpacking the stand
Figure 1 Unpacking the stand
Unpacking
1 Open the stand crate by removing the top (1) and then the side wall (2).
2 Take out all enclosed packages (accessories, installation material, cover panels etc.)
from the crate.
3 Remove the wooden supports.
4 Remove the remaining walls (3).
5 Upend the stand (4) , with pallet (5) (two persons are required).
6 Loosen the four bolts (6) and remove the pallet (5).
MAM00080
1
2
2
1
3
6
5
4