Siemens MAMMOMAT 300 - Connecting the cables to control-button board and patient handles; Attaching the covers

Siemens-Elema AB SPS-UD RX B7-120.033.01.10.02 MAMMOMAT 300
Solna, Sweden 05.98 65 02 186
8-2 Attaching the swivel-arm covers
Attaching the covers
Screws in different size are included in the delivery.
Figure 2 Covers and sign
1 Mount the side covers (1) with six screws (2) on each side.
NOTE!
Don’t forget to fit the sign (3) when mounting the side covers. Use the two longer screws.
2 Mount the front cover (4) over the side covers by engaging the bottom end first, and
fasten with two short screws (5).
MAM00109
5
4
1
2
3