Siemens MAMMOMAT 300 - Removing the transport safeguards; Transport safeguard for the lifting carriage

Siemens-Elema AB SPS-UD RX B7-120.033.01.10.02 MAMMOMAT 300
Solna, Sweden 05.98 65 02 186
Preparatory work 3-3
Removing the transport safeguards
Removing the swivel-arm system transport safeguard
Figure 2 Swivel-arm system transport safeguard
1 Loosen the transport safeguard nuts (1) and remove the tube head screws (2).
2 Push the red transport safeguard (3) inwards, away from the tube head.
NOTE!
Removal of the swivel-arm system transport safeguard is done after the equipment has
been powered up, see further section "Attaching the swivel-arm covers", page 8-1.
Transport safeguard for the lifting carriage
Figure 3 Transport safeguard for the lifting carriage
MAM00081
1
2
3
2
1
MAM00082