Siemens OpenStage 40 T

Individual phone configuration
117
Step by Step
Individual phone configuration
Adjusting display settings
Adjusting the display to a comfortable
reading angle
You can swivel the display unit. Adjust the display unit
so that you can clearly read the screen.
Illuminated display
During operation and when entering a number, the dis-
play automatically lights up. The display lighting switch-
es off automatically a few seconds after finishing the
last action.
Setting contrast
The display has eight contrast levels that you can set ac-
cording to your light conditions.
+ or - Press one of the keys shown in idle mode Æ page 21.
Select and confirm the option shown.
+ or - Change the display contrast. Keep pressing the key until
the desired contrast is set.
i Save.
Adjusting displays on the OpenStage
key module
You can adapt the contrast for a connected
OpenStage key module to the lighting conditions in
eight levels.
+ or - Press one of the keys shown in idle mode Æ page 20.
Select and confirm the option shown.
+ or - Keep pressing the key until the desired contrast is set.
i Save.
Display contrast?
Label contrast?