Siemens OpenStage 40 T User Manual

Dialing with call charge assignment
87
Step by Step
Call duration display
Call duration display is configured by the relevant ser-
vice personnel. The display can show either call dura-
tion or call charges. It can also be switched off.
The call duration appears in the first line of the display
on the right as HH:MM:SS and in 24-hour format. It is
shown 10 seconds after the call starts.
The call charge display feature must be requested from
the network operator and configured by the relevant
service personnel.

Siemens OpenStage 40 T Specifications

General

Speakerphone	Yes
USB Port	No
Headset Port	Yes
Ethernet Ports	2
Power over Ethernet (PoE)	Yes
Protocols	SIP
Supported Codecs	G.711, G.729