Step by Step
Moving with the Phone
94
Moving with the Phone
Check with your service personnel whether this is pos-
sible in your system!
After talking to your service personnel, you can log your
telephone off from the current port and log on again at
the new port. Phone settings are then unchanged.
Logging the phone off from the current
port
j Enter the logoff code. If necessary ask your service per-
sonnel for this code.
j Enter the PIN.
Unplug the phone plug from the port socket.
Log the phone on at the new location
Put the phone plus in the port socket.
j Enter the logon code. If necessary ask your service per-
sonnel for this code.
j Enter the PIN.
Enter code!
Enter code!
If you move with a first and second phone, e.g. in
an executive-secretary configuration), the second
phone must be logged off first and then the first
phone. At the new port the first phone must be
logged on first and then the second phone.
To Next Page
Loading...
Need help?
General
