Siemens SIMATIC ET 200AL - Page 105

Accessories/spare parts
C.2 Cables
Distributed I/O system
System Manual, 02/2018, A5E31861578-AF
103
General information
One time bending, min.
20 mm
Multiple bending, min. 40 mm
Constant bending
100 mm
Color of the cable sheath Green
Color of the wire insulation of the data wires
White, yellow, blue, orange
Weight per length
34 kg/km
Mechanics/material
Type of cable outlet 180° cable outlet
90° cable outlet (with angled connectors)
Number of connectors
1 or 2
Connector housing material
Metal
Wire insulation material
PE
Cable sheath material
PVC
Material property halogen free
No
Material property silicon free
Yes
* = Applies to cable lengths up to 10 meters.
The following table shows the technical properties of the bus cable ET-Connection, PUR
cable.
Table C- 9 Cables for ET-Connection, PUR cable
General information
Product type designation
BUS CABLE ET-CONNECTION, PUR CABLE
Function To connect ET-CONNECTION devices with de-
gree of protection IP65/IP67
Degree of protection and protection class
IP65 Yes
IP67
Yes
Ambient conditions
Ambient temperature during mounting
minimum
-30 °C
maximum
80 °C
Storage/transport temperature
Ambient temperature during transport and storage
minimum
-40 °C
maximum
80 °C
Cables
Cable designation
2Y(ST)C11Y 2x2x0.5/1.0-100-GN
Number of electrical wires
4
Design of shielding Overlapped aluminum-lined sheet, coated with
shielding made of tin plated copper wires
Outside diameter of the inner conductor
0.5 mm
Outside diameter of the wire insulation
1.0 mm