Programming
4.3 Time-based IO
High-precision input/output with Time-based IO
Function Manual, 08/2014, A5E33454822-AB
57
00110000 The assigned value at the Out_Mode input parameter is
outside the valid range of 0 to 3.
Correct the value at the Out_Mode input
UDT "TIO_SYNC_Data"
Description
The data type UDT "TIO_SYNC_Data" contains the central structure and data for
synchronization of the modules and passing of the TIO_Time.
Shared time basis (relative time) of the TIO modules.
PIP_MODE USInt Mode for data update (is forwarded by the PIP_Mode
input parameter of the TIO_SYNC instruction)
Application cycle of the "Synchronous Cycle" OB
SEND_CLOCK LTime Send clock of sync domain (is forwarded by the
SendClock input parameter of the TIO_SYNC instruction)
To Next Page
Loading...
