Siemens SIMATIC ET 200AL - Setting up Open User Communication Via TCP, ISO-On-TCP, UDP and ISO

Open User Communication
6.5 Setting up Open User Communication via TCP, ISO-on-TCP, UDP and ISO
Communication
76 Function Manual, 12/2017, A5E03735815-AF
6.5
Setting up Open User Communication via TCP, ISO-on-TCP, UDP
and ISO
Configuring a connection for the TSEND_C, TRCV_C or TCON instructions
Requirement: A TSEND_C, TRCV_C or TCON instruction is created in the programming
editor.
1. Select a TCON, TSEND_C or TRCV_C block of Open User Communication in the
program editor.
2. Open the "Properties > Configuration" tab in the inspector window.