Siemens SIMATIC ET 200AL - Page 1052

Diagnostics and maintenance
4.5 Diagnostics in STEP 7
PROFINET with STEP 7 V15
Function Manual, 12/2017, A5E03444486-AH
105
Diagnostics of PROFINET ports
If you select "PROFINET interface > Ports" in the Diagnostics area in the online &
diagnostics device view of a PROFINET device, the ports of the PROFINET interface are
listed in a table.
The table provides you with the following information about the ports of the PROFINET
interface.
● Name
● Status
● Settings
● Operating mode
Figure 4-16 Diagnostics of PROFINET ports in STEP 7
Additional information
You can find information on the system diagnostics for S7-1500, ET 200MP, ET 200SP and
ET 200AL in the Diagnostics
(http://support.automation.siemens.com/WW/view/en/59192926
) function manual and online
help for STEP 7.