Functions
5.2 Intelligent IO devices (I-devices)
PROFINET with STEP 7 V15
122 Function Manual, 12/2017, A5E03444486-AH
Example - the I-device as IO device and IO controller
The I-device as IO device and IO controller is explained based on the example of a print
process. The I-device controls a unit (a subprocess). One unit is used, for example, to insert
additional sheets such as flyers or brochures in a package of printed material.
Figure 5-9 Example - the I-device as IO device and IO controller
Unit 1 and unit 2 each consist of an I-device with centralized I/O. The I-device along with the
distributed I/O system (for example ET 200) forms unit 3.
The user program on the I-device is responsible for preprocessing the process data. For this
task, the user program of the I-device requires default settings (for example control data)
from the higher-level IO controller. The I-device provides the higher-level IO controller with
the results (for example status of its subtask).
To Next Page
Loading...
