Functions
5.5 Real-time communication
PROFINET with STEP 7 V15
188 Function Manual, 12/2017, A5E03444486-AH
Setting limitation of the data infeed into the network for a CPU
To set the limitation of the data infeed into the network, follow these steps:
1. In the network view of STEP 7, select the interface of the CPU.
2. In the Inspector window, go to "Properties" > "General" > "Advanced options" > "Interface
options".
3. Select or clear the "Limit data infeed into the network" check box.
Figure 5-54 Limit data infeed into the network
To Next Page
Loading...
