Functions
5.1 Isochronous mode
PROFIBUS with STEP 7 V13
Function Manual, 12/2014, A5E03775446-AC
73
1. Select the input module in the device view.
2. Select the section "Inputs" in the Inspector window.
3. Adapt the input delay.
Figure 5-9 Adapting the input delay
Compile, load and save the changed configuration
1. Put the plant out of operation.
2. Select the CPU in the project navigator.
3. Select "Compile > Hardware" in the shortcut menu.
4. Select "Download to device" in the shortcut menu.
5. Save the project.
To Next Page
Loading...
