Integration into the automation system
3.1 Configuration of the IO-Link system
IO-Link system
Function Manual, 12/2017, A5E31637677-AB
23
Example configuration in S7-PCT
The following figure shows the configuration of an IO-Link master in S7-PCT.
This S7-PCT view shows you a wide variety of information:
Higher-level field bus and overview or structure of the lower-level IO-Link master
Detailed information on the selected IO-Link master
Current configuration of the IO-Link ports of the selected IO-Link master
Detailed information on the selected IO-Link device
Device catalog with the IODDS of the IO-Link devices from different manufacturers
Figure 3-3 Configuration of an IO-Link master in S7-PCT
Address range of the ports
In addition to the assignment of the IO-Link devices to the IO-Link master ports, the default
address ranges of the ports can be changed. The IO-Link master transfers the process
values that it receives from the IO-Link device in these address ranges and makes the
process values available to the higher-level automation system.
To set the address range, select the "Addresses" tab.
To Next Page
Loading...
