What you should know about analog technology
2.14 Diagnostics
Analog value processing
Function Manual, 06/2014, A5E03461439-AC
45
Activating the "Overload" checkbox activates the diagnostics of the thermal monitoring of the
output level. The "Overload" diagnostics is triggered when the maximum temperature is
exceeded at the output and is detected channel by channel.
The maximum temperature may be exceeded for the following reasons:
● Ambient temperature is too high
● Output is being operated outside the specification
Note
Overload
Please note that overload exposes the modules to a high thermal load. This can affect the
output
channels. You should therefore avoid continuously running analog output modules in
To Next Page
Loading...
