Programming
4.2 Programming of Time-based IO
High-precision input/output with Time-based IO
Function Manual, 08/2014, A5E33454822-AB
31
4. Set the data update mode at the TIO_SYNC instruction at the PIP_Mode input parameter.
The description of the modes is available in the chapter Technical implementation
(Page 20).
The parameter assignment of the TIO_SYNC TIO instruction is complete.
5. For the following instructions, note the call sequence depending on the selected value for
PIP_Mode:
6. Add the TIO instructions for data read-in/output required for your application in the
"Synchronous Cycle" OB.
To Next Page
Loading...
