Siemens SIMATIC ET 200AL - Page 198

Product overview
2.1 Properties
Interface module IM 157-1 PN (6ES7157-1AB00-0AB0)
Manual, 12/2016, A5E32347036-AD
9
Maximum configuration
The module has the following maximum configuration:
● 1430 bytes input data
● 1430 bytes output data
● 32 I/O modules, up to 16 I/O modules can be connected for each ET-Connection line
Note
•
In the case of a shared device configuration, the sum of the I/O data of all controllers that
share the device applies.
•
If more than two (max. four) controllers share the device, the maximum amount of I/O
data including user data qualifier is limited to 360 bytes per controller.
Accessories
The following component is included with the module in the packaging:
● Identification labels
Other components
The following component can be ordered as spare part:
● Identification labels
The following components can be ordered as accessories:
● Connectors
● Cables
● Stripping Tool for PROFINET
● Stripping Tool for ET-Connection
● M8 sealing cap
● M12 sealing cap
See also
You will find additional information on accessories and the other components in the
Accessories/Spare parts section of the ET 200AL Distributed I/O System
(http://support.automation.siemens.com/WW/view/en/89254965
) system manual.