Digital input module DI 8x24VDC 8xM8 (6ES7141-5BF00-0BA0)
4 Manual, 02/2016, A5E32349579-AC
Purpose of the documentation
This manual supplements the ET 200AL distributed I/O system
(http://support.automation.siemens.com/WW/view/en/89254965) system manual. Functions
that are generally applicable to the ET 200AL distributed I/O system are described there.
The information provided in the present manual, the system manual and the function
manuals enables you to commission the ET 200AL distributed I/O system.
Please also observe notes marked as follows:
Note
Indicates important product information to which particular attention should be paid.
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, solutions, machines, equipment and/or networks. They are
important components in a holistic industrial security concept. With this in mind, Siemens’
products and solutions undergo continuous development. Siemens recommends strongly
that you regularly check for product updates.
For the secure operation of Siemens products and solutions, it is necessary to take suitable
preventive action (e.g. cell protection concept) and integrate each component into a holistic,
state-of-the-art industrial security concept. Third-party products that may be in use should
also be considered. You can find more information about industrial security on the Internet
(http://www.siemens.com/industrialsecurity).
To stay informed about product updates as they occur, sign up for a product-specific
newsletter. You can find more information on the Internet
(http://support.automation.siemens.com).
To Next Page
Loading...
