Product overview
2.2 Operator controls and display elements
Digital input module DI 8x24VDC 4xM12 (6ES7141-5AF00-0BA0)
Manual, 02/2016, A5E36680963-AA
11
Operator controls and display elements
The figure below shows the operator controls and display elements of the
DI 8x24VDC 4xM12 digital input module.
DIAG: LED display for the diagnostic status
X10 to X13: Sockets for the input signal
X80: Connector for infeed of the supply voltage (POWER input)
X81: Socket for loop-through of the supply voltage (POWER output)
X30: Socket for ET-Connection IN
X31: Socket for ET-Connection OUT
LED displays 0 to 7 for the channel status
Image 2-2 Operator controls and display elements
To Next Page
Loading...
