Siemens SIMATIC ET 200AL - Page 292

Digital input module DI 16x24VDC 8xM12 (6ES7141-5AH00-0BA0)
16 Manual, 02/2016, A5E36681813-AA
Parameters/address space
4
4.1
Parameters
The table below shows the parameters for the DI 16x24VDC 8xM12 digital input module.
Table 4- 1 Parameters
Parameters
Value range
Default
Scope
Diagnostics: Short-circuit to ground
• Disable
• Enable
Disable Module
4.2
Explanation of the parameters
Diagnostics: Short-circuit to ground
Enabling of the diagnostics if a short-circuit of the encoder supply to ground occurs.
4.3
Address space
The figure below shows the assignment of the address space for the digital input module
DI 16x24VDC 8xM12 with value status (Quality Information, QI).
The address space for the value status is allocated by the module, if the value status is
configured using the PROFINET interface module.
Image 4-1 Address space